Why your Smeg oven stops working, and how we fix it
When a Smeg oven stops working, the cause we find is usually electrical: a burnt mode switch or connections, a failed heating element, or a section of the control board. On gas models it is the ignition: a spark igniter or a thermocouple. These are real cases from LE Company’s Smeg oven jobs in London. Every repair we do starts with checking and cleaning the oven, because burnt connections and failing elements often start with grease and heat that a service would have caught. For repairs, see our Smeg oven repair page.

Smeg oven not heating, or heating on one side
On one Smeg oven the left heating element had failed and the right one was working at about half power. Both elements were replaced, together with the door hinges and rollers. On another, the spark igniter and the thermostat set were replaced after a full test. A thermostat that fails shows as an oven that does not reach temperature or overshoots it.
Smeg oven completely dead
A Smeg oven that would not work at all had burnt lines on the main mode switch, the knob that selects the oven function. We fitted a temporary extension so the oven could be used until the new part arrived. On another oven the clock had stopped working: the cause was burnt connections, which we replaced.
Smeg oven light will not turn off
This sounds minor, but on a Smeg oven we attended the light section of the main control board had failed. Only that part of the board was affected, and the board was replaced.
Smeg gas oven or hob will not ignite
On a Smeg gas cooker with an ignition fault we replaced a thermocouple and cleaned the gas valve; the thermocouple is the safety part that keeps the gas on once the flame is lit, and when it fails the flame goes out as soon as you let go of the knob. Our engineers are Gas Safe registered.
Self-cleaning panels and doors
A self-cleaning panel that has come loose can be refitted. Door hinges and rollers wear on an oven used every day; replacing them keeps the door sealing, which matters for even heating.
Is a Smeg oven worth repairing?
Usually yes: elements, switches, thermostats, hinges and igniters are standard parts. Our engineers rate Smeg build quality highly; in our Gaggenau vs Miele comparison we explain why the Smeg Galileo Omnichef has overtaken both in ovens. See also our Smeg repair service.
Book a Smeg oven repair in London
LE Company’s call-out is from £175 + VAT and includes the first 30 minutes on site, when the engineer finds the cause of the fault. The cost of the repair is agreed with you before any work starts. Call +44 203 603 7172.