Rational oven fan impeller out of balance: the vibration had damaged the heating element
A RATIONAL fan impeller that is out of balance can keep running for months, and the damage it does is not to the fan alone. LE Company engineers serviced two RATIONAL SelfCookingCenter SCC 61 E combi ovens in a restaurant in Soho, Central London, on 7 October 2026, fitting parts ordered after earlier visits. On the second oven, behind the old impeller, the vibration had damaged the inner loop of the heating element where it joins its holding plate.
We went: a planned visit to fit genuine parts to two ovens
The customer reported no new fault. The visit was planned to fit the spares we had ordered for the two ovens: a speaker and an air inlet filter for the first, a new impeller (fan wheel) and an air inlet filter for the second.

We found: the old impeller had shaken the heating element
With the old impeller removed from the second oven, we inspected what sits behind it. The impeller was out of balance, and its imbalance and vibration had damaged the inner loop of the heating element at its connection to the holding plate. The element still worked, so there was no restriction on using the oven at that point.
We did: new impeller, new filters and a full test
- Oven 1: replaced the speaker and the air inlet filter (genuine RATIONAL 40.02.684P).
- Oven 2: removed the old impeller and fitted a new one, inspected the heating element, and replaced the air inlet filter (40.02.684P).
- Ran a full engineering test on both ovens after the work: both operating.
- Recommended considering a replacement of the second oven's heating element, because of the damaged loop.
Rational oven fan noisy or vibrating: what to do
A RATIONAL fan that has become noisy, rattles or vibrates should be checked early: an impeller out of balance loads the motor bearings and, as on this job, can damage the heating element around it. The air inlet filter matters too: it keeps dust and grease away from the electronics and the motor, and it is one of the parts we replace most often on RATIONAL ovens. Read our RATIONAL oven repair in London page, RATIONAL error codes explained, and how we found a failing lower fan motor that made a Rational cook unevenly. Other jobs: a steam generator full of scale and four Rational ovens repaired in Soho. To keep ovens running, see planned preventative maintenance.
Questions
What happens if a Rational fan impeller is out of balance?
The oven can keep running, but the vibration loads the fan motor and can damage parts nearby. On a RATIONAL SCC 61 E in Soho, LE Company found that the vibration had damaged the inner loop of the heating element at its holding plate.
Why is my Rational oven fan noisy?
Usually an impeller out of balance or dirty, worn motor bearings, or something touching the fan. Switch it off and have it checked before the vibration damages the heating element or the motor.
What does the air inlet filter do on a Rational oven?
It filters the cooling air drawn into the oven's technical compartment, keeping dust and grease away from the electronics and motors. On SelfCookingCenter models the genuine part is 40.02.684P.
Can a damaged Rational heating element still be used?
Sometimes, for a while. On this job the element still worked and there was no restriction on use, but we recommended considering a replacement because the loop was damaged.
Book a RATIONAL oven repair
LE Company’s call-out is from £175 + VAT and includes the first 30 minutes on site, when the engineer finds the cause. The cost of any repair is agreed with you before work starts, and we fit only genuine RATIONAL parts. For an emergency we dispatch an engineer within an hour and aim to be with you within 4 hours, traffic permitting. Call +44 203 603 7172.