La Marzocco error codes and alarms: what they mean
Most La Marzocco alarms point to water, not electronics: the Flowmeter Alarm (AL8 on a Linea Classic S) means no water is flowing through the group’s flowmeter, and the Filling-up Alarm (AL6) means the steam boiler did not fill in time, so the machine switches itself off. The rest are boiler temperature and probe alarms, which need an engineer. LE Company engineers have repaired and serviced La Marzocco machines in London since 2022, from the Linea Mini and GS3 at home to two-group Linea PB machines in cafés, and on the machines we see most of these alarms come back to scale, blocked water lines and worn seals. The meanings below are taken from La Marzocco’s own manuals.

La Marzocco flowmeter alarm (AL8)
The flowmeter alarm means the control board is not getting a signal from the flowmeter of a group, so water is not flowing through it. The light on the button that started the shot flashes, and pressing a button silences the alarm. La Marzocco’s GB5 manual lists the causes: coffee packed too tightly, a blockage in the tubes, a malfunctioning water pump, a faulty valve or a damaged flowmeter. Try a coarser grind or a lighter dose first; if the alarm comes back with an empty portafilter, call an engineer. A group that runs slow, or a shower head that barely flows, is often the first sign.
La Marzocco AL6: steam boiler filling time-out
AL6 on a Linea Classic S, shown as “Filling-up Alarm” on machines with a text display, means the control board did not see a full signal from the steam boiler within the set time. The machine shuts down and cuts power; press ON/OFF to reset it. Check first that the water supply is on and the water filter is not blocked. If it comes back, the usual causes are scale on the autofill (level) probe, a failing water pump or a faulty fill valve. In Chelsea a two-group machine had been connected incorrectly: our engineer reconnected the water filter and the pump with a new pipe and connectors.
La Marzocco alarm list
Messages from La Marzocco’s GB5 operating manual (MAN.3.1.02) and the Linea Classic quick start guide. The Linea PB shows similar messages, such as Steam Boiler Autofill Failed and Flow Meter No Pulse; the Linea Classic S shows the AL number on its display.
Message | Meaning | What to do |
Flowmeter Alarm (AL8) | No signal from a group’s flowmeter: water is not flowing | Check grind and dose; if it returns, engineer (pump, valve, blockage, flowmeter) |
Filling-up Alarm (AL6) | Steam boiler not full within the set time; machine shuts down | Check water supply and filter, press ON/OFF to reset |
Low level probe alarm (AL5) | Steam boiler water level probe; on the GB5 the message is “Steam Boiler Empty”: no signal from the safety probe | Steam heating is switched off until the probe is repaired: engineer |
Filter alarm (AL7) | “Change Filter”: the programmed volume of water has passed | Change the water filter cartridge, then reset the counter |
Coffee Boiler Heating | Coffee boiler did not reach minimum temperature in time; the number shows which boiler | Engineer: element, probe or control board |
Coffee Boiler Temperature | Coffee boiler above maximum temperature; power to it is cut | Engineer |
Steam Boiler Temperature | Steam boiler above maximum temperature; power to it is cut | Engineer |
Probe Failed | Boiler temperature probe not detected (Linea PB); machine shuts down | Engineer: reconnect or replace the probe |
Autosteam Temperature | Autosteam wand above maximum temperature | Engineer |
Corrupted Data | The control board did not understand an instruction, usually after power was cut without switching off at the keypad | Switch off and on at the main switch |
Electronic boards connection | Boards not talking to each other (four-group machines) | Engineer |
La Marzocco not steaming or leaking
Many La Marzocco problems show no alarm at all. These are the ones we are called for most, with what our engineers found:
- Steam wand not working and water leaking from the hot water tap. On a café machine in the West End we cleaned the water valves, replaced two rubber seals in the steam tap and one in the steam valve, and descaled the hot water nozzle.
- Machine leaking. On a two-group machine in the City our engineer found and fixed the leak the same day, then cleaned, descaled and tested the machine.
- Steam that will not stop, or a hot water spout that keeps running. Usually a worn seal or a scaled valve that no longer closes.
- Linea Mini that stops steaming or loses pressure. Home machines in hard-water London scale up in the steam boiler; a service and descale comes first.
- Workshop service. When a two-group machine from a Clerkenwell restaurant came in for a full service, it also needed a new fan motor; we lent a replacement La Marzocco while it was away.
What you can check yourself
- Water supply on, filter cartridge in date (AL6, AL7).
- Grind and dose: a shot that will not flow can set off the flowmeter alarm (AL8).
- Backflush the groups and clean the shower screens every day.
- Switch off at the keypad before switching off at the wall (Corrupted Data).
- For any boiler temperature or probe alarm, call an engineer: the machine has already cut power to that boiler for a reason.
La Marzocco service in London
Every repair starts with checking and cleaning: descaling, seals, shower screens and the water line. For a busy café we usually recommend a service every three months. See our La Marzocco repair in London page, how to look after a La Marzocco Strada S, commercial coffee machine maintenance and, for other makes, Sage coffee machine error codes and Miele coffee machine error codes.
Book a La Marzocco repair
LE Company’s call-out is from £175 + VAT and includes the first 30 minutes on site, when the engineer finds the cause. The cost of the repair is agreed with you before any work starts. 12-month guarantee on parts — we fit only original manufacturer parts. If a machine has to come to our workshop, we can lend a replacement while it is away. See commercial coffee machine repair in London or call +44 203 603 7172, Monday to Saturday, 8am to 8pm.