Why Is My Gaggenau Oven Not Heating Properly?

Why Is My Gaggenau Oven Not Heating Properly?

---

Context

Intro
​Issues you can fix yourself
​When to turn to professionals
​​   Failed heating element or control board
   Malfunctioning temperature sensor

---

Intro

In short, if your Gaggenau oven is not heating properly, there could be two types of issues to blame. For issues of the first type, DIY fixes are possible. However, for issues of the second type, you need to turn to a professional Gaggenau service.

---

Issues you can fix yourself

Gaggenau ovens are complex appliances, so there are just few issues to fix on your own. Still, if your Gaggenau is not heating properly, first check these simple issues before taking any other steps:

• The unit stopped getting power
• The Pure Steam mode is enabled
• There is limescale build-up

If the unit first was well-powered but then stopped getting power, it stopped heating as well. Check the fuse box, or circuit breaker (RDC). Reset the breaker or replace the blown fuse.

If you enabled Pure Steam mode, the oven cannot get hotter than boiling point (100°C). Switch to the Combi mode to get higher temperature.
​
If your oven has a limescale build up, this can also prevent proper heating. Descale your appliance as it is recommended in the manuals.

---

When to turn to professionals

Failed heating element or control board

If it takes an extremely long time to reach the targeted temperature, it could be a failed heating element or control board to blame. Heating element or control board replacement is a complicated procedure. Only an experienced engineer, qualified in electrical repairs in general and Gaggenau repairs in particular, should accomplish this task.

Malfunctioning temperature sensor

Malfunctioning temperature sensor is often a main cause why a Gaggenau oven is not heating property. Typically, the signs of faulty temperature sensor are as follows:

• Inaccurate oven temperature (lower than you set it)
• Food burns on one side but is raw on the other

​Fixing the faulty temperature does not always involve sensor replacement. If the sensor just got loosened from its mounting bracket without being damaged, simple adjustment can help. However, this is always a task that should be entrusted to a qualified Gaggenau engineer.

So, if your Gaggenau is not heating properly and DIY fixes cannot help, turn to a repair company with vast experience in deep proficiency in Gaggenau repairs. Gaggenau ovens are complicated and require not only special tools, but also special engineering knowledge – this is not a job for an ordinary technician or handyman.

Know why your Gaggenau oven is not heating properly. What you can fix yourself and what requires a professional engineer.